Craft Brewing

INLINE AERATION / oXYGENATion

Manual Unit

Air / Oxygen is injected into wort through Inline DENWEL Injector, which splits the gas into micro bubbles. Most efficient and instant saturation is achieved with minimal pressure drop and no gas loss. Fully hygienic CIP design. No static mixer or sinter candles needed.

  • Micro bubble size
  • Instant saturation
  • Sterile gas and steam filters

more information

   

INLINE Carbonation

Mobile Manual Unit

CO2 is injected into beverege through DENWEL Injector, which splits the gas into micro bubbles. The most efficient and instant dissolution of CO2 is achieved with only minimal pressure drop and no gas and flavor loss. No static mixer, sinter candle or tank with stone is required. Designed for CIP, no parts of the Injector have to be removed for sanitation.

  • Micro bubble size
  • Instant saturation
  • Efficient, hygienic design

more information

   

INLINE Carbonation

Semi-automatic Unit

The Inline Semi-automatic Carbonation Unit is designed for continuous carbonation of beverages, where a precise CO2 ratio injection maintains carbonation at desired concentration. An integrated pump with a pressure holding valve maintains required pressure for carbonation. Fully hygienic CIP design.

  • Micro bubble size
  • Instant saturation
  • Ratio controlled

more information

 
 

INLINE Carbonation

Automatic Unit

The Inline Automatic Carbonation Unit is designed for continuous carbonation of beverages. The system is PLC controlled and has automatic modes for continuous carbonation and CIP. The selective inline CO2 analyzer continuously monitors the CO2 concentration. A high precission control valve accurately adjusts the CO2 injection, avoidng any over or under carbonation.

  • Micro bubble size
  • Instant saturation
  • COanalyzer controlled

more information

 
 

WATER Deaeration

Column Cold

The Deaeration unit is designed for efficient and reliable deaeration of water under atmospheric conditions. The Column is filled with structured packing enabling a large internal surface which allows stripping out the Oxygen to levels below 10 ppb.

more information

Column Cold Vacuum

The Deaeration colummn operates under vacuum, decreasing gas solubility in water. Therefore stripping gas consumption is significantly lower compared to the unit working under atmospheric pressure. Final Oxygen concentration is less than 10 ppb.

  • Final Oxygen below 10 ppb
  • Carbonation of Deareated Water
  • Efficient, safe, approved

more information

 

 

WATER Deaeration

Membrane Unit

The membrane contactor contains thousands of microporous hydrophobic hollow fibers. The CO2 / N2 is applied on the inside of the hollow fibers and pulled out by vacuum. The high difference in partial pressure forces the Oxygen out of the liquid phase.

  • Final Oxygen below 10 ppb
  • Water prefiltration
  • Expandable capacity

more information

   

INLINE Nitrogenation

High Concentration Unit

The Inline High Concentration Nitrogenation Unit provides efficient beverage Nitrogenation using hydrophobic hollow fiber membranes with final Nitrogen concentration up to 80 ppm. Configuration of membrane contactors depends on capacity and required Nitrogen concentration.

  • Creamy head, avalanche effect
  • Long-lasting foam stability
  • Efficient and precise Nitrogen control

more information

   

DOSING

Compact Unit

The Compact Dosing Unit provides continuous dosing of one, or more additives into beverage, water or cleaning solution. A precise dosing rate is controlled by process analytics or volume / mass flow measurement. Additives are dosed from homogenizing vessels.

  • Full capacity range
  • Vessels with stirrer
  • Precise and reliable dosing

more information

    

   

FLASH PASTEURIZATION

Automatic Unit

The Flash Pasteurization Automatic Unit is designed for safe, precise and reliable heating of beverages. While reducing pathogenic microorganisms, uniform and gentle treatment is applied to maintain the original taste and appearance of beverage.

  • Gentle and precise heat treatment
  • Constant Pasteurization
  • Heat recovery up to 96%

more information

   

CIP

Mobile Unit

The Mobile CIP Unit reliably removes mineral and biological residues. CIP sequencing valves are used so no pipe reconnections is required. Includes sampling valve for concentration check during cleaning and automatic temperature control. The unit can be used with various detergents for cold or hot cleaning.

  • Three sizes of Caustic and Acid vessel
  • For tanks, pipes and equipment cleaning
  • Optimal cleaning performance

more information

   

CIP

Compact Unit

The Compact CIP Unit provides a single line cleaning of pipes, tanks and process technology in the brewery. It includes insulated Caustic and not insulated Acid and Water recovery vessels. Automatic CIP sequencing with defined temperature, flow or pressure.

  • Insulated Caustic, Acid and Water recovery vessels
  • Automatic CIP sequencing
  • Optimal cleaning performance

more information

   

Service & support

We understand Service & Support as a key for longterm relationship. Our after sales service always provides immediate and effective support. Preventive Maintenance & Service Agreements help our customer to meet specific operational and productivity goals and stop larger failures from occurring, potentially saving significant time and money.

  • Remote Support
  • Rental Equipment
  • Cost control

more information



© 2019, DENWEL EU, s.r.o. – All rights reserved

Terms of use | Sitemap

Created by eBRÁNA s.r.o. | Powered by CMS WebArchitect | SEO a internetový marketing

to top ↑